Menu
Common Problems:Windows 2000:. Right-click on the “Prolific USB to Serial Port”, then click Properties. Now click on “Port Settings”. Then click the “Advanced” button. Always uncheck “Use automatic settings”. Now select “Input/Output range”.
![]() ![]()
The Gigaware USB to Serial Driver is nothing more than another USB driver from Prolific. The installation process has been explained here (FT232R USB UART Driver). The driver has been added below for the Gigaware version of the software. If it does not work then take a look at the Prolific original drivers.
Click on the “Change Settings” option. Type “02E8-02EF” in the Value box. This value will change the port to COM 4.If COM 4 is in use, you must choose another port. The values for each port are.
COM 1: 03F8-03FF. COM 2: 02F8-02FF. COM 3: 03E8-03EF. COM 4: 02E8-02EFEnter the value, then click OK. Click OK again, then click Yes when the “Creating a Forced Configuration” window appears. Windows Generic:If you are having problems then check if you have installed the driver correctly.
This is done by doing the following on your computer to check the installation. If the USB driver has been properly installed, “Serialio.com USB Serial Port” or “Prolific USB-to-Serial COM Port” will be displayed.Windows Vista: Start Control Panel System Hardware Device Manager.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |